Portofino Fountain

Add timeless elegance to your outdoor space with the Portofino Fountain, a sophisticated piece designed to elevate any garden or patio. This fountain features a classic design with intricate detailing, allowing water to flow gracefully. Its Lead Antique finish enhances its refined charm, making it the perfect focal point for courtyards, gardens, or entryways. Create a serene, tranquil atmosphere in your landscape with the Portofino Fountain, available now at The Well Appointed House.

Campania’s GFRC, Glass Fiber Reinforced Concrete, is a Portland cement based composite material with moisture resistant glass fibers randomly dispersed throughout the material. The fibers serve as reinforcement to enhance the concrete’s flexural, tensile, and impact strength. The glass fibers used are high zirconia alkali resistant. Our GFRC is manufactured using the spray up technique resulting in a wall thickness of approximately ½" (tolerance +/- 1/8"). The high compressive strength of our GFRC results in a frost proof, thaw proof, rust proof, and fire proof material that meets the standards for commercial use. 

Product Overview:

• Material: GFRC (Glass Fiber Reinforced Concrete)
• Color: Lead Antique
• Dimensions: 59" L x 24" W x 47.25" H
• Base: 59" L x 24" W
• Weight: 317 lbs
• Water Volume: 60 Gallons
• Ease of Assembly: Very easy assembly
• Assistance Required: Heavy, may require lifting assistance
• Splash Level: Little to minimal splash
• Sound Level: Can be heard from a distance even with moderate traffic
• Sound Type: Steady stream
  
• Electrical Cord Length: 16FT
• Pump Size: 300 GPH
• Care Instructions: We suggest that birdbath/fountain tops not be left outside in the winter. Once the top fills with water/snow and freezes, the top may crack. All birdbath/fountain bases, bench legs and statuary should be raised up off the ground in winter so they will not freeze to the ground surface. Ideally, a fountain should be stored indoors in the winter away from the elements. However, if a fountain bowl must be left outside, remove all pumps, rubber stoppers, drain pipes, finials and small components, and cover the top with burlap or any absorbent material (old blanket/towel) and then wrapped with dark plastic, making sure that water does not accumulate in the basin and freeze. Fountain pumps, finials, and other small components should be stored indoors. Check the fountain periodically to insure that the cover is secure and water is not accumulating in any fountain component.